![]() ![]() Guide the polishing ball down the length of the pontoon while moving the drill in a small ‘S’ pattern to blend the polish into the surface of the aluminum. Generally speaking, this will involve placing metal polish on the polishing ball, running the cordless drill clockwise at a slow speed to start, then increasing speed once the polish is absorbed. In addition to a metal polish, you’ll need a polishing ball, a standard cordless drill and a clean terry cloth.Īpplication of the metal polish should be done based on the directions on the container. ![]() Many boat owners swear by Sharkhide or Biokleen metal polishes. This step can take some time, but if done properly it will only need to be done once in a while. Now that your pontoons are free of discoloration, it’s time to apply metal polish. Barkeeper’s Friend (available at Wal-Mart and other major stores).Some more aluminum safe cleaning products are listed below: Apply the cleaner to a small piece of aluminum on the underside of your boat and rinse it off after a short period of time, repeating and increasing the amount of time until you have achieved your desired result. If you are unsure about how long to leave the cleaner on the aluminum, you can test it on a less-visible part of your pontoon. Whichever cleaner you use, the general directions are to apply the cleaner, scrub it into the aluminum, let it sit for several minutes, rinse it off and repeat if necessary. Two popular aluminum cleaners are Sharkhide or Biokleen. There are countless options on the market for boat cleaning solutions, but they all do the same thing: clean aluminum. However, if there is visible, significant build-up on the aluminum, you will need to apply a cleaner. If you’re diligent about keeping the pontoons clean, this step is quick and easy. If your boat is relatively new or doesn’t spend much time in the water, this step can be as simple as a quick rinse by hand with a bucket and sponge, or with a hose or power washer. ![]() Follow these three steps to clean your aluminum pontoons. Regularly inspecting your pontoons and cleaning them as soon as they begin to lose their shine is much easier than restoring them after they have become badly oxidized or discolored. It can take days, weeks or months before discoloration becomes noticeable, depending on the body of water your boat is in. By adopting a strategy of regular cleaning during the boating season, you can keep oxidation and discoloration at bay and keep your pontoons looking great. Bare aluminum is subject to surface oxidation, and it can be discolored by prolonged exposure to a variety of minerals, organisms, and chemicals in the water. Aluminum pontoons look great when a pontoon boat is fresh from the dealer, but that beautiful reflective shine will fade after a while. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |